The now iconic Wailer 112RP has been redesigned and rebooted into something even more special. Featuring a lower tip and tail rocker profile that increases power and stability in mixed snow without compromising the RP’s legendary versatility, the Wailer 112RP2 is now endowed with a bigger sweet spot across a larger speed spectrum. A new chapter to the story has begun and the 112RP2 is poised to become one of skiing’s truly all-time classic shapes.
141/112/128 | Radius: 15-18m
168cm, 178cm, 184cm, 190cm
Pure3 @184cm: 1830g
Hybrid @184cm: 2140g
Tour1@ 184cm: 1550g
Wailer 112RP Reviews from Freeskier Magazine
“Many DPS skis are available in a hybrid (fiberglass/carbon/bamboo) construction as well as the Pure3 that we tested, a lighter, stiffer carbon-and poplar-based sandwich construction with three vertical aluminum ribs. Complete with rockered tip and tail as well as slight camber underfoot, testers praised the Wailer 112RP as “a great all-round ski for pow and variable conditions,” Its playful nature stood out to skiers, who commented, “They’re so easy to turn and whip around,” and “Kept up at speed. Really fun to open up on these.”
“Using DPS’s new Pure3 carbon pre-preg construction, which minimizes weight and waste in the process, the new Wailer 112 got even higher marks than last year. Heavy rocker in the tip and tail, an enormous shovel, and camber underfoot combine to produce one of the most unique powder rides out there. Testers raved about the 112’s ability to instantly initiate turns and change turn radii on the fly. “Super quick edge to edge, one said, “and no effort necessary to schmear mid-turn.” Another said it “has no speed limit and always feels playful.” Criticiums include a lack of dampness on hard snow, and an elusive sweet spot for some “Finicky sweet spot— that’s what she said,” one joked.
Wailer 112RP Review from Backcountry Magazine
“Offers up a fun, playful ride by slashing and spraying turns however you want.”
"A powder pillager that is light enough to haul anywhere.”
Wailer 112RP Review from Powder Magazine
“What I noticed most about this ski during a Granite Canyon lap with a foot of fresh wasn’t so much its excellence in powder, but rather its all-out speed. With a rockered—and tapered—tip and tail, and slight bit of camber, the Wailer flies over the snow with so much ease and determination that the rush it produces should be either very illegal (which is good) or very dangerous (also good). Like most DPS skis, the Wailer 112RP is available in full carbon sandwich construction or a hybrid. The Pure layup reduces the weight of a similarly sized ski by 30 percent, making it the perfect choice for skiers who spend a lot of time sniffing out the powder on long bootpacks or traverses.”
Wailer 112RP Review from Outside Magazine
“DPS makes some lofty claims about the Pure SE, but testers were smitten. The fully tip-and tail-rockered ski floated through everything, while its traditional camber underfoot laid down a reliable edge on hardpack. Its bulbous nose surfed over chop, and true to DPS’s claims, it was one of the most energetic skis we tested. Also available in a cheaper (though heavier) Hybrid…Pricey but tons of fun.”
Wailer 112RP Review from Skiing Magazine
“We tested the ultra lightweight Pure construction of this ski and were flabbergasted by its lightness and ease in powder. Designed to be a resort-use powder ski that can carve groomed run-outs, it lives up to its billing. Radically rockered tips plane over powder and deep chop without blinking. Light, playful, and easy to steer, it will take you through last chair with leg strength to spare.”
DPS is rooted in design and engineering. We are after the perfect ski. That single-minded goal has meant a history rooted in revolutionary carbon constructions and shapes. We currently build the entire quiver of skis in 2 different constructions:
- Pure Prepreg Carbon Laminates and Nanotech Resins
- A specially designed Aspen wood core that mates with the carbon build
- The fastest and hardest Austrian World Cup race bases
- Wide profile Rockwell 48 edges
- the finest ISO Polyamide tops and burly UHMW sidewalls.
- Wetlayup Triax Glass with 30mm center Uni carbon stringer on both top and bottom laminates
- Bamboo Core
- The fastest and hardest Austrian World Cup race bases
- Wide profile Rockwell 48 edges
- ABS top with burly UHMW sidewalls
TOUR1: PREPREG CARBON+GLASS TOUR1 LAMINATE
- Full cap textured polyamide top
- Narrow profile Rockwell 48 edges
- Prepreg carbon / glass Tour1 laminate
- Balsa core
- Fastest and hardest World Cup race bases
PERSONALIZED SKI FITTING
Talk to a ski fitting expert over the phone or email.
You Might Also Like--> -->
DPS Ski Mounting FormWhen you purchase skis and bindings on dpsskis.com you can select to have DPS mount your bindings on your skis for a service fee. We then ship your new skis mounted to you. You will then have to take your skis to a certified binding technician to adjust your DIN settings. If you add binding mounting services to your cart, you must complete the form set forth below and agree to the liability waiver and release (the “Waiver”). You must complete a separate Waiver for each ski and binding combination purchased.
Note: Before completing this Waiver, make sure that the appropriate skis and bindings are in your shopping cart and that you have selected the option to have DPS mount your bindings on your skis. We will follow-up with a phone call or email if we have any questions.
*Release Of Liability
I acknowledge that I am at least 18 years old and that I must read and accept the terms of this Waiver as indicated below as a requirement for requesting that DPS mount the bindings selected above on the skis selected above. I have carefully read, the terms of this Waiver and understand and agree to the terms of this Waiver. I understand and agree that this is a legally binding contract.
WARNING, ASSUMPTION OF RISK, LIABILITY RELEASE, INDEMNITY and HOLD HARMLESS AGREEMENT
WARNING: BINDING DIN SETTINGS MUST BE ADJUSTED BY A CERTIFIED SKI TECHNICIAN BEFORE USE. DPS DOES NOT SET YOUR BINDING’S DIN SETTINGS.I authorize DPS Skis to perform such work that is necessary to properly mount, test and/or repair my skis, bindings and/or boots (the “Equipment”).
I understand and agree that participation in skiing, snowboarding and related activities is HAZARDOUS and is not without significant risks. Such hazards and risks cannot be avoided without destroying the unique character of such activities. I understand that the same elements that contribute to the unique character of such activities can cause loss or damage to the Equipment as well as injuries that can in some cases be permanent or even death. I understand that such injuries and even death are common and ordinary occurrences during these activities.
I elect to participate in such activities using the Equipment despite the inherent and unknown risks and the possibility of injuries and death described above. I accept and assume full responsibility for ALL RISKS associated with such activities, including injury and death associated with the use of the Equipment. My participation in such activities using any items of the Equipment is purely voluntary and I have not been coerced or forced into participating.
With respect to the Equipment, I understand that the ski-boot-binding system is designed to release the boot from the ski when certain forces on the system reach preset values, but that the binding MAY NOT NECESSARILY RELEASE OR RETAIN THE SKI at all times where release or retention may prevent injury, and that RELEASE OR RETENTION CANNOT NECESSARILY PREVENT ALL INJURIES OR DEATH. I understand and agree that: (A) lower settings on the bindings will increase releasability but also increase the risk of injury that may be caused by inadvertent release of the ski; (B) higher settings on the bindings will increase retention but also increase the risk of injury that may be caused by retention; and (C) injuries due to unwanted release or retention of the ski are inherent risks of skiing.
I understand and agree that certain risk of skiing and snowboarding may be reduced, but not entirely eliminated, by: (A) taking lessons; (B) following the “YOUR RESPONSIBILITY CODE” which is posted at most winter sport recreational areas, and (C) using reasonable care and common sense. I further understand that a leash or other runaway prevention system is required with all skis and snowboards at all times, including while riding lifts and while carrying snowboards on or near a slope, in order to reduce the risk of injury to others.
I understand and agree that I will be responsible for all injuries to others caused by the use of any item of the Equipment by me or any other person. I will be responsible for all damage to the property of others or injuries or death to others resulting from the use of any item of the Equipment by me or any other person.
To the fullest extent allowed by law, I, on behalf of myself, my spouse and other family members, my heirs, executors, representatives and estate, hereby agree to forever WAIVE, RELEASE, DISCHARGE AND PROMISE NOT TO SUE OR ASSERT CLAMS AGAINST DPS, and all manufacturers and distributors of any item of the Equipment, as well as their respective owners, agents, employees, affiliated companies and successors and assigns, from ANY AND ALL RESPONSIBILITY, LOSSES, CLAIMS, SUITS, CAUSES OF ACTION, DAMAGES, EXPENSES OR ANY OTHER LEGAL LIABILITY incurred by them or arising out of the use of any item of the Equipment by me or any other person, including without limitation, any damage to property of, injuries to, or death of any user of any item of the Equipment, whether resulting from such parties’ negligence or any other cause.
I hereby further agree that I WILL HOLD HARMLESS, DEFEND AND INDEMNIFY SUCH PARTIES if any claims, suits, causes of action or other legal action is pursued by any third parties against them for any injuries, damages or death related to the use of any item of the Equipment by me or any other person.
I accept the Equipment “AS IS” and with NO WARRANTIES, express or implied, beyond the applicable manufacturer's written limited warranty, if any.
This document is a LEGALLY BINDING CONTRACT which supersedes any other agreements by or between the parties, and which constitutes the FINAL AND ENTIRE AGREEMENT regarding this transaction and this equipment. This document is intended to provide a COMPREHENSIVE RELEASE OF ALL LIABILITY which is binding upon and for the benefit of all parties, their heirs, agents and assigns, but it is not intended to assert any claims or defenses that are prohibited by law. If any part of this agreement is held to be invalid or unenforceable the remainder shall be given full force and effect. The specific legal rights of the parties may vary among different states and provinces.
I agree that this document shall be governed by and construed in accordance with the laws of Colorado. I agree that any action or proceeding commenced under or with respect to this Agreement shall be brought only in the county or district courts of Boulder County, Colorado, and I irrevocably consent to the jurisdiction of such courts and waive any right to alter or change venue, including by removal. I WAIVE ALL MY RIGHTS TO TRIAL BY JURY OF ANY SUIT, CLAIM, CAUSE OF ACTION OR OTHER ACTION ARISING OUT OF OR RELATED TO THE USE OF ANY ITEM OF THE EQUIPMENT BY ME OR ANY OTHER PERSON.
You will receive an email containing an electronic copy of this document after the completion of checkout. Another will be printed for DPS’s records.